Check and replace CRT. This manual also for: IC Pin 16 input is over 4. Degaussing circuit is right? Video Output Amp Circuit. Page 5 General Soldering Guidelines 1.
|Date Added:||14 March 2010|
|File Size:||63.15 Mb|
|Operating Systems:||Windows NT/2000/XP/2003/2003/7/8/10 MacOS 10/X|
|Price:||Free* [*Free Regsitration Required]|
Table of Contents Add to my manuals Add. By pressing ‘print’ button you will print only current page.
Check and replace IC and IC Check and replace IC IC Pin 45 and 46 inputs are right? TbhklFlatron tbhkFlatron tdsh kFlatron tsh pg, Flatron tshk.
LG Flatron T730BH Manuals
Adjustment of White Balance After clatron adjustment of cut off back rasterapprove “Color Waveforms Q, Collector To print the manual completely, please, download it. Page 27 The Voltage waveform Q Collector is right?
Don’t show me this message again. Q drain waveform flatfon right? Check the CRT Socket. T Pin 6 Voltage exists? IC Pin 18 waveform is right?
G2 voltage is right? Cable Connection Figure 1.
These parts are marked on the schematic diagram and the replacement parts list. IC Pins 27 and 28 inputs are right at each function?
LG TBH Product Support :Manuals, Warranty & More | LG Australia
If unforeseen circumstances create conflict between the following servicing precautions and any of the safety precautions on page 3 of fltaron publication, always follow the safety precautions. Micom Failure IC, 46 Don’t have an account? Purity Failure Degaussing Purity is right? Dynamic focus circuit is right? This circuit amplifies the video signal which comes from the video pre-amp circuit and amplified it to applied the CDT cathode – 12 T pin 2 voltage is change with H frequency?
Side Pin or Trap Failure Replace the CRT and verify focus. High Voltage Failure Q drain waveform is right?
LG Flatron TBH monitor specifications
Check and replace CRT. Q base, collector waveforms are right? Page of 49 Go. Visible Retrace Check white balance adjustment. The Voltage waveform Q Collector is right? The following guidelines and procedures should be followed whenever this condition is encountered.
Use a grounded-tip, low-wattage soldering iron and appropriate tip size and shape that will maintain tip temperature within the range or F to F.